What PoE is
and what it's for
PoE, Power over Ethernet, means powering a device through the same network cable that carries its data. A camera on the façade, a Wi-Fi access point on the ceiling or a phone on the desk gets its power from the switch, with no socket nearby. When setting it up there are two things to check: how many watts each device needs and how many the switch can share out among them all.
By Ismael Vázquez, founder and technician · Published 19 November 2026
Data and power over the same cable
The device doesn't need a socket nearby. Just the network cable.
PoE (Power over Ethernet) means powering a device through the same network cable that brings it its data. The switch, or the camera recorder, sends the power; the camera, Wi-Fi access point or phone receives it and switches on.
It sounds like a detail, but it changes the installation: no power socket is needed on the façade, on the ceiling or in the corridor. Everything is powered from the network cabinet, which is also the only place that needs a UPS to keep things running when the power goes.
Three devices that almost always run on PoE
The ones that sit where there's usually no socket.
IP cameras
One cable per camera, picture and power. If it hangs, you restart it from the switch, no ladder needed. Why it beats Wi-Fi, in Wi-Fi or PoE cameras.
Wi-Fi access points
They go on the ceiling, where they cover best and where there's never a socket. With PoE they go where they're needed, not where there's an outlet. How many, in how many mesh nodes you need.
IP phones
On the desk, with no adapter or extension lead. And if the switch and router are on a UPS, the phone keeps working during a power cut.
PoE switch or injector
Both do the same job. What changes is how many devices.
PoE switch
A switch that also supplies power through its ports. It's the norm when there are several cameras or several access points. Many NVR recorders have one built in for the cameras.
Injector
A unit placed in line on a single cable and plugged into the mains. Useful for a single device when the existing switch isn't PoE. With three or four, a switch is better.
How many watts each version delivers
Figures from the Ethernet Alliance's technical overview of the IEEE 802.3 standard. The difference between the columns is lost in the cable.
| Standard | At the switch port | At the device |
|---|---|---|
| 802.3af (Type 1) | 15.4 W | 13 W |
| 802.3at (Type 2, “PoE+”) | 30 W | 25.5 W |
| 802.3bt (Type 3) | 60 W | 51 W |
| 802.3bt (Type 4) | 90 W | 71.3 W |
Three sums you need to do
Without them, the switch looks big enough on the box and falls short on the ceiling.
What each device needs
On its datasheet: the standard it needs and its maximum consumption. Cameras with strong infrared, motors or heaters draw considerably more than a basic one.
The switch's power budget
The total power it shares among all ports at once, which isn't one port's output multiplied by the number of ports. The devices' total has to fit, with headroom.
100 metres per run
That's the limit of network cable, and PoE doesn't change it. If the run is longer: an intermediate switch and a new run.
If you're running cable, let it carry the power
What we don't recommend: choosing the switch by number of ports.
In a new installation of cameras or professional Wi-Fi, PoE by default: one cable per point, centralised power and a single UPS in the cabinet. Choose the switch by power budget, not just by ports, and check that everything is 802.3 standard before mixing brands.
If you like, we'll look at the devices you're going to connect, add up the watts and tell you which switch makes sense. It's part of how we leave a business network set up.
What people usually ask
What is PoE?+
PoE stands for Power over Ethernet. It's an IEEE standard that lets the same network cable that carries data to a device also carry the power it needs to run. The equipment supplying the power, usually a switch or a camera recorder, is called the PSE in the standard; the one receiving it — a camera, a Wi-Fi access point or an IP phone — is called the PD. The practical result is that you don't need a socket where the device goes: the network cable reaching it is enough. That's why it's so widely used for façade cameras, ceiling access points and office phones.
What are the advantages over a socket next to the device?+
The first is that you save on electrical work at each point: no need to fit a socket on the façade for a camera or on the ceiling for a Wi-Fi access point. The second is that all the power comes from one place, the network cabinet, so a UPS there keeps every PoE device running during a power cut, instead of needing one per point. The third is maintenance: if a camera or access point hangs, it can be restarted by cutting its power from the switch, without climbing a ladder. And expanding means running another network cable, not a network cable plus a power cable.
What's the difference between a PoE switch and an injector?+
A PoE switch is an ordinary switch that also supplies power on some or all of its ports; it's what you install when there are several devices to power. An injector is a unit placed in line on a single cable: the unpowered network cable goes in on one side, it plugs into the mains, and the cable carrying data and power comes out the other side towards the device. It makes sense for a single point, for example a lone Wi-Fi access point when the existing switch isn't PoE. From two or three devices upwards, a PoE switch is usually tidier than a row of injectors with their plugs, and keeps all the power centralised in one place.
What is a PoE switch's power budget?+
It's the total power the switch can share out among all its ports at once, and it's almost always less than the sum of what each port could deliver on its own. A switch can have lots of PoE ports and still be unable to power all of them at full output at the same time. So you need to add up what the devices you'll connect require, checking each one's datasheet, and make sure the total fits within that budget with some headroom. If it doesn't, the switch cuts power to a port or won't power it up. Cameras with powerful infrared, motors or heaters and the larger Wi-Fi access points are what push the figure up most.
What are 802.3af, 802.3at and 802.3bt?+
They are the versions of the IEEE PoE standard, each with more power. According to the Ethernet Alliance's technical overview, 802.3af (Type 1, from 2003) delivers up to 15.4 W at the switch port and guarantees 13 W at the device; 802.3at (Type 2, usually sold as PoE+) delivers 30 W at the port and 25.5 W at the device; and 802.3bt adds Type 3, with 60 W at the port and 51 W at the device, and Type 4, with 90 W and 71.3 W. The difference between the two figures is lost in the cable. The types are compatible with each other: a more powerful switch will power a more modest device, and a device that needs more, connected to an older switch, can only draw what that switch provides.
How far does PoE reach?+
The same as network cabling: 100 metres per run, from the switch to the device. PoE neither adds nor takes away distance, because it travels over the same cable. For the vast majority of homes, shops and offices that's more than enough. When the run is longer, as in a very large warehouse or between two buildings on a property, you put an intermediate switch closer to the devices and start a new run from there. It's better to do the sums on a floor plan before buying cable than to find out with the camera mounted and no picture.
Can I plug any device into a PoE port?+
With standard PoE, yes: before supplying power, the switch checks that what's on the other end is a PoE device and how much power it requests, and if it isn't, that port works as an ordinary network port. A computer or printer connected to a PoE switch receives no power and comes to no harm. Where you need to be careful is with so-called passive injectors and switches, which supply power without that check. They work with the devices they're designed for, but they shouldn't be mixed with other brands' equipment without checking both datasheets. If the box doesn't mention the 802.3 standard, ask before connecting.
Let’s take the step together
Shall we look at it
together?
Tell us about your situation and we'll give you just the advice you need, without overselling. Free quote. We take calls in Spanish or Catalan; in English we reply by email or WhatsApp.
644 836 122CALL OR WHATSAPP USAsk for advice and a quote
Fill this in and we'll call you. No obligation.